|
Full Inspections
A thorough evaluation of the major subsystems
including: structure, exterior, roof and gutters, plumbing,
electrical, interior, heating and cooling, insulation and
ventilation, and all major appliances. A computer generated report
is provided on-site or by e-mail/fax.
|
Price Range |
Inspection Fee |
-
-
450K or
below
-
-
-
451K to
500K
-
501K to
550K
-
551K to
600K
-
601K to
650K
-
651K to 700K
-
701K to 750K
-
751K to 800K
-
801K to 850K
-
851K to 900K
-
901K to 950K
-
951K to 1M
-
1M to 1.5M
-
1.5M to 2M
|
-
-
0.1% with
$325 minimum for Detached Single Family Homes
-
$295 minimum for Town Homes
-
$225 minimum for Condos
-
$450*
-
$475*
-
$500 *
-
$525*
-
$550*
-
$575*
-
$600*
-
$625*
-
$650*
-
$675*
-
$725*
-
$825*
-
$900*
-
*Subtract $50 for Town Homes
-
*Subtract $100 for Condos
|
Note: Our inspections are conducted during normal
working hours, but arranging for off-hour inspections is often
possible. There is a 10% additional fee for Saturday and late
inspections (4 pm or later).
Our service area is between Washington, Baltimore,
Frederick and Annapolis. We will do inspections outside of these
areas for an additional Travel Fee.
Other Inspections
Fee
Followup
$100
A
re-inspection of specific defects that were to be corrected prior to
closing.
Partial
$125/hour ($150 minimum)
The evaluation of a
single component, system or problem (e.g. water in the basement,
roof, furnace, etc.)
Homeowner's Maintenance Inspection
$289
New Construction
A
3-phase inspection to include any or all of the following:
pre-backfill inspection of the foundation, a pre-drywall inspection
of the completed framing, electrical, plumbing, heating and cooling,
and a pre-settlement walk-through.
Pre-backfill
$125
Pre-drywall (single family) $275
($295 if greater than
3000 sf)
Pre-drywall (townhome) $250
Pre-settlement
Same as full insp. (less 25% if
pre-drywall conducted)
An evaluation of the exterior, roof, attic area,
attic fans, gutters, furnace/heat pump, water heater, plumbing
leaks, moisture in the basement, chimneys, decks, smoke detectors,
carbon monoxide detectors, etc. A computer generated report is
provided on-site or by e-mail/fax.
Environmental Inspections
Fee
Radon testing with
home inspection $100
Radon testing
without home inspection $150
Mold testing with
home inspection $125 plus samples
Mold testing without
home inspection $175 plus samples
Mold
samples
$75 2-3 day turnaround
$50 4-5 day turnaround
|
